• 2 double zipper gates for large entrance heights and horseback riding

• very tear-resistant PVC tarpaulin 850

• robust steel construction

• optional: Statik set

• Crise 3 m

The Outlander tent hall:

• needs no foundation – the perfect, flexible large garage!

• is very durable & stable – ideal for longer-term applications!

• protects against wind & weather – simply the optimal (outdoor) warehouse!

Specifications

Steel rods

Thanks to fully galvanized steel pipes, the linkage is optimally protected against corrosion and rust.

The size:

• galvanized from inside & outside

• is shock & scratch tosensitive

Specifications:

• fully galvanised steel pipes approx.: 50 mm; wall thickness: 1.6 mm

• Steel tube connector approx.: Ã Â 54 mm; wall thickness: 1.7 mm

Linked connection

The inserted bolzation of all connections is safe and reinforces the entire construction.

This is the connection:

• All construction elements are connected with a inserted screw connection

• It is resistant and low-maintenance

• Installation with approx. 50 mm threaded screws with wing nuts

Specifications:

• Steel tube connector approx.: Ã Â 54 mm; wall thickness: 1.7 mm

Double roof reinforcing

Additional components in the roof increase the stability of the construction.

Moulding beam struts:

• holds the opposite roof other ravers

• reinforce the roof gable at pressure from above

Steel tensioner:

• hold the adjacent roof spars together

• prevent the water bag formation on the roof tarpaulin

Side wall reinforcing

Additional components in the tent increase the stability of the construction.

Corner amplifier:

• achieve additional construction stiffening

• Mounting on all corner posts in the first side panel

Diagonal connectors:

• connect the standing legs with the rafters

• optimize load distribution in the roof

Floor frame

The floor frame effectively secures and fixes the legs on the ground, thereby increasing the stability of the tent hall many times over.

Practical added value:

• is part of the tarpaulin tension system (tension belts & ropes)

• tensions tarpaulins securely over the link

• reduces unwanted tarpaulin movements

Attachment

The stability of the tent hall is increased by extra large feet for soft and hard ground.

• Each foot element is double anchored

• Dimensions foot plate: approx. 20 x 20 cm

The foot elements are attached to the ground

• Hard flooring: with 10 cm long concrete dowels

Tip: For attachment to floating paving stones should be used

Statics

The statics is a structural calculation, which identifies the actual snow and wind load of the tent. Only one tent with statics and the additional stiffening set (included) guarantees the load limits.

The result:

• Full holding of the wind load to be assumed according to DIN EN 1991, i.e. with maximum measured wind forces stable ^{*4 *5}

• The removable load for this tent is calculated in the static and is indicated in kg/m2 ^{*4 *7}

• The statics are based on the DIN standards: DIN EN 1990 1991

• The static manual and all parts required for the construction are included in the scope of delivery

• For soil anchorage, an anchoring system for concrete or earth surfaces can be selected as required

• The statics is suitable for any required submission for public authorities ^*8